Back
Spinning Machinery
CL winding machine parts (general-purpose parts)
2017-12-22 17:40  Visit:104
Price:Unfilled
Send inquiry

 

CL Model winding machine has four series, i.e. A type pagoda, B type cylinder, C type cone and CL Model single-spindle winding machine (especially design for the thread dividing work in clothing plant and embroidery plant). Each series has been shaped into the effective length according to the balls with various specifications. The common specifications are 1.5 inch (38mm), 1.8 inch (45mm), 2 inch (50mm), 3 inch (75mm), 3.4 inch (85mm), 3.6 inch (90mm), 3.8 inch (95mm), 4 inch (100mm), 5 inch (125mm), 6 inch (150mm). It may also produce the special specifications goods according to the consumer's requirements.
CL winding machine parts (general-purpose parts)
<img height="461" src="../images/pj5.jpg" width="520" />
D-1 O1041
V-type belt		 D-2
Motor		 D-3
Metering instrument		 D-4
Electric control box
D-5
Sensor		 D-6
Metering device		 D-7
Metering wheel kit		 D-8
Metering wheel
D-9
23 Rolling bearing		 D-10
Oiling cup		 D-11
Lengthened oiling cup		 D-12
Stem wheel
D-13
Pulley		 D-14
Oiling belt		 D-15
Overlapping wheel		 D-16
Oiling wheel iron axle
D-17
Oiling wheel		 D-18
Tension coil		 D-19
Iron thread gripper plate		 D-20
Steel thread gripper plate
D-21
Oiling cup copper bar		 D-22
Alumina sheath		 D-23
Oiling cup porcelain sheet		 D-24
Disconnection switch
D-25
Disconnection copper sheet		 D-26
Small lock type		 D-27
Relay		 D-28
Circuit board
D-29
Dock		 D-30
Sensing tears meters		    

 

Message

TO: ncbmmc8021

E-mail:

Content:

Contact information
Company:Ningbo City Beilun Machine Manufacturing Co.,Ltd
Status:Offline Send a letter
Name:ncbmmc8021(Ms.)
Tel:0086-574-86727134
Fax:0086-574-86729150
Area:Beijing
Address:No.28 Fengcheng Road,BaiFeng Town,Beilun District, Ningbo City, Zhejiang Province
Zip code:315813
Linkurl:http://ncbmmc8021.ycfdgs.com/
Comment
0