27dBm 2100MHz Signal Booster MGC AGC ALC

Original
price: Negotiable
minimum:
Total supply:
Delivery term: The date of payment from buyers deliver within days
seat: Guangdong
Validity to: Long-term effective
Last update: 2017-10-18 05:24
Browse the number: 274
inquiry
Company Profile
 
 
Product details

HPC-W27 3G WCDMA2100mhz Mobile Phone signal booster

3G mobile networks are everywhere around the world but depending on where a mobile phone is located, regrettably the quality of the 3G signals differ significantly from excellent to poor. The item in auction is designed to address the signals strength issue by boosting the signals in two directions (Full Duplex) :

1. Signals transmitted from a mobile phone are received by the signal booster over the air via the booster's indoor antenna and these signals are amplified and retransmitted over the air via the booster's outdoor antenna to a nearby cellular phone base station.

2. Signals transmitted from a cellular phone base station are received over the air by the booster via the booster's outdoor antenna and these signals are amplified and retransmitted over the air via the booster's indoor antenna to a mobile phone.

The 3G Booster can be viewed as an intermediate agent to help to set up a reliable wireless link between a mobile phone and the 3G mobile networks infrastructure.

We provides signal boosters kits for any Homes, Offices, Cars, RV's, Boats and more. All amplifier kits come with Indoor and Outdoor Antennas, Cables, Power adapters and more.

HPC-W-27 WCDMA 3G 21mhz repeater Features:

1.With unique appearance design, have good cooling function

2.With MGC function,(Manual Gain Control), Customer can adjust the Gain as needed ;

3.With DL signal LED display, help to install the outdoor antenna at the best state;

4.With AGC and ALC, make repeater work stable . 

5.PCB with isolation function ,make UL and DL signal not influence each other,

6.Low intermodulation, high Gain ,stable Output power 

HPC-W-27 2100mhz repeater Inside and Outside Design

HPC-W-27 Dual band repeater is to support any two mobile band existing in the world to help end users to improve mobile signals for much better phone call quality and smoother data transmission. It is designed to support coverage area max can up to 2000 square meters with proper engineering. Below are the main features.

1. The consumer repeater is an ideal solution for providing a cost effective improvement in cellular in-building coverage of a home, office, restaurant or building, in the quickest time possible.

2. Manual gain control (MGC) available for both uplink and downlink to adjust the gain value for proper coverage during installation or maintenance.

3. To maintain safe and specific output signal levels and give alarms on self-oscillation, the repeater has built-in AGC and ALC circuits, which can automatically control the gain of the repeater depending upon the strength of input signals.

4. Auto shut off function available for both uplink and downlink to avoid deep self-oscilation from jamming the towers, saving your trouble from operators. 

5.Wide band feature enables all devices operating within the wide frequency range of the repeater to see an improvement in performance.

6.Multiple phones and other handheld devices throughout a building can benefit from a wireless repeater.

7.Supports up to (500) users / calls simultaneously.

8.Extended phone battery life. (Your phone does not need to put out as much power due to improved reception.)

Specification of HPC-W-27 Dual band repeater:

Electrical specification

Uplink

Downlink

Frequency Range

WCDMA 2100

1920 ~ 1980 MHz

2110 ~ 2170 MHz

Max .Gain

≥ 75dB

≥ 78dB

Max .Output Power

≥ 24dBm

≥ 27dBm

MGC ( Step Attenuation )

≥ 31dB / 1dB step

Automatic Level Control

≥ 20dB

Gain Flatness

GSM & CDMA

Tpy≤ 6dB(P-P); DCS,PCS ≤ 8dB(P-P)

WCDMA

≤ 2dB/ 3.84MHz,Full Band ≤ 5dB(P-P)

Noise Figure

≤ 5dB

VSWR

≤ 2.0

Group Delay

≤ 1.5μs

Frequency stability

≤ 0.01ppm

Spurious Emission & Output inter-modulation

GSM Meet  ETSI TS 151 026 V 6.1.0

WCDMA Meet 3GPP TS 25.143 ( V 6.2.0 )

CDMA Meet  IS95 & CDMA2000

WCDMA System

Spurious Emission Mask

Meet 3GPP TS 25.143 ( V 6.2.0 )

Modulation Accuracy

≤ 12.5%

Peak Code Domain Error

≤ -35dB@Spreading Factor 256

CDMA System

Rho

ρ > 0.980

ACPR

Meet IS95 & CDMA2000

Mechanical Specifications

Standard

I /O Port

N-Female

Impedance

50 ohm

Operating Temperature

-25ºC~+55ºC

Environment Conditions

IP40

Dimensions

155x112x85mm

Weight

≤ 1.50Kg

Power Supply

Input AC90-264V,output DC 5V / 3A

LED Alarm

Standard

Power LED

Power Indicator

UL LED

Be lighted when there is phone calling

DL 1

Be lighted when Outdoor signal is -65dB

DL 2

Be lighted when Outdoor signal only -55dB

DL 3

Be lighted when Outdoor signal only -50dB

The installtion of the Repeater

Outdoor antenna ( for receiving the signal from the BTS ) + Cable ( transfering the received signal) + Repeater ( for amplifying the received signal) + cable( for transfering the amplified signal) + indoor antenna( for shooting the amplified signal), 

(Note : Omni indoor antenna is 3dBi,it can work with about 200m2 . If need repeater coverage larger area , need add more antenna,the HPC-W-27 Max can work with 10pcs indoor antenna.  ( when add antenna ,please remember to take splitters )

How should you install repeater (very easy and simple):

Step 1: Use your mobile phone to test signal strength outside house or on roof, -70dbm is the basic requirement (full bar).

Step 2 Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal.

Step3: Run outdoor coaxial cable into building in a convenient location to connect with signal repeater.

step 4: Mount your indoor antenna with signal repeater

step5:  Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal.

Note: Connect outdoor (BTS) port with outdoor antenna, connect indoor ANT(MS) port with indoor antenna, outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away from each other at least.

Indoor and outdoor antenna must be separated by wall.

Of course there are still a few more things to consider but in general, this is the basic procedure. For more information, please contact us.

Terms and Conditions

Certificate

CE/RoHs

Country of Origin

China

Port of Dispatch

Shenzhen

Production Capacity

1000pcs/month

Date of Delivery

Within 3 days after received payment inform

MOQ

10pcs

Warranty

2years

Pacakge

1pcs/box; 20pcs/carton

Country of Origin

China


Total0bar [View All]  Related Comments
 
more»Other products

[ Products search ] [ favorites ] [ Tell friends ] [ Print ] [ Close ]